To Next Page

To Previous Page

6 49-1000418 Rev. 6

Installation Requirements

CAUTION

Lifting Hazard: It is recommended to have two people move and install the ice maker in

order to prevent injury.

■Productisdesignedtobeinstalledindoors.Donot

use your ice maker outdoors.

■Productmustbeinstalleduprightonaflat,level

surface that is able to support the total weight when

full of water.

■Ensureaminimumofthreeinches(3")clearance

around the side and back walls of the ice maker for

proper air circulation.

■Installtheproductinawell-ventilatedareawithan

ambienttemperaturebetween55°Fand90°F.

■Donotplacetheproductnearheatsourcessuchas

ovens or cooktops.

■Donotplacetheproductindirectsunlight.

Prepare Opal For Use

1.Carefullyremovepackingmaterial.Donotusesharp

toolsthatcandamagetheboxcontents.

2.Ensureallcomponentsarepresent.Ifanyitemis

missing, please contact1.866.907.6718.

3. Place the ice maker upright on a flat, level surface

and plug it in.

4.Installdriptraybyslidingitunderthefrontedgeof

Opal. The tray slots should align with the front feet of

Opal.

5.Rinsetheicemakerwithcleanwaterforfive

minutesbeforefirstuse.Startwithstep4ofcleaning

instructionsonpage6.Itisnotnecessarytouse

bleach for the first rinse.

NOTICE

Sometypesofunder-cabinetlampscanbehotenough

tocausedamagetoyourOpaltop'sappearance.

Getting Started

GETTING STARTED

GE OPAL01GEPKT User Manual

Questions and Answers: