EasyManua.ls Logo

GE Over the Range Instructions Microwave Oven User Manual

GE Over the Range Instructions Microwave Oven
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
READ CAREFULLY.
KEEP THESE INSTRUCTIONS
.
Installation Over the Range
Instructions Microwave Oven
Read these instructions completely and carefully.
IMPORTANT – Save these
instructions for local inspector’s use.
IMPORTANT – Observe all
governing codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the Consumer.
BEFORE YOU BEGIN
Note to Consumer – Keep these
instructions for future reference.
Skill level Installation of this appliance requires
basic mechanical and electrical skills.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
For a Spanish version of this manual, visit our Website at ge.com.
Para consultar una version en español de este manual de instrucciones, visite nuestro sitio
de internet ge.com.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the GE Over the Range Instructions Microwave Oven and is the answer not in the manual?

GE Over the Range Instructions Microwave Oven Specifications

General IconGeneral
BrandGE
ModelOver the Range Instructions Microwave Oven
CategoryMicrowave Oven
LanguageEnglish

Summary

Important Safety Instructions

Electrical Requirements

Hood Exhaust

Outside Top Exhaust (Example Only)

Example ductwork installation for venting upwards.

Outside Back Exhaust (Example Only)

Example ductwork installation for venting through the back.

Hood Exhaust Details

Maximum Duct Length

Details on maximum allowable duct length and calculation methods.

Duct Component Effects on Length

Explains how duct components affect total length calculation.

Damage and Parts Information

Damage During Shipment or Installation

Procedures for handling damage during shipment or installation.

Included Parts Overview

Inventory of hardware and additional parts provided.

Hardware Packet Contents

List of screws, bolts, and grommets in the hardware packet.

Additional Parts List

List of included items like templates and filters.

Tools and Mounting Space

Tools Required for Installation

List of necessary tools for installation.

Required Mounting Space

Specifies the required clearance and dimensions for installation.

Mounting Plate Placement

Unpacking and Removing Mounting Plate

Steps for unpacking the oven and detaching the mounting plate.

Finding Wall Studs for Mounting

Methods for locating wall studs for secure mounting.

Determining Wall Plate Location Under Cabinet

Position for Flat Bottom Cabinets

Instructions for flat bottom cabinets.

Position for Framed Recessed Cabinets

Instructions for framed recessed cabinets.

Position for Cabinets with Front Overhang

Instructions for cabinets with front overhang.

Aligning the Wall Plate

Installation Types Overview

A: Outside Top Exhaust (Vertical Duct)

Section detailing installation for vertical top exhaust.

B: Outside Back Exhaust (Horizontal Duct)

Section detailing installation for horizontal back exhaust.

C: Recirculating (Non-Vented Ductless)

Section detailing installation for non-vented recirculating air.

A: Outside Top Exhaust Installation

Installation Overview

General steps for the top exhaust installation process.

A1: Attach Mounting Plate to Wall

Instructions for securely attaching the mounting plate to the wall.

A2: Top Cabinet Preparation

A3: Check Damper Operation

A4: Mount the Microwave Oven

A4: Mount the Microwave Oven (Continued)

A5: Adjust Exhaust Adaptor

A6: Connect Ductwork

B: Outside Back Exhaust Installation

Installation Overview

General steps for the back exhaust installation process.

B1: Prepare Rear Wall for Exhaust

Instructions for cutting the opening in the rear wall.

B2: Remove Exhaust Adaptor

Steps for removing the exhaust adaptor from the unit.

B3: Attach Mounting Plate to Wall

B4: Top Cabinet Preparation

B5: Adapt Microwave Blower for Back Exhaust

B5: Adapt Microwave Blower for Back Exhaust (Continued)

B6: Mount the Microwave Oven

C: Recirculating Installation

Installation Overview

General steps for the recirculating installation process.

C1: Attach Mounting Plate to Wall

Instructions for attaching the mounting plate to the wall.

C2: Top Cabinet Preparation

How to use the template for cabinet preparation.

C3: Check Microwave Assembly

C4: Adapt Microwave Blower for Recirculation

C4: Adapt Microwave Blower for Recirculation (Continued)

C5: Mount the Microwave Oven

C5: Mount the Microwave Oven (Continued)

C6: Install Charcoal Filter

Before You Use Your Microwave

Verify Correct Installation

Verify correct installation as per manual guidelines.

Remove Packing Material

Ensure all protective packaging is removed before use.

Install Turntable and Ring

Place the turntable and roller ring inside the microwave cavity.

Restore Power

Restore electrical power to the appliance.

Connect to Dedicated Outlet

Connect the microwave to a properly rated power outlet.

Consult Owner's Manual

Consult the Owner's Manual for additional information.

Retain for Inspector

Retain these instructions for inspection purposes.

Related product manuals