GE PEB2060 User Manual (English)

Questions and Answers:

B
Brian MoodyJul 31, 2025
Why GE PEB2060 won't start?
- R
  Rebekah RichardsonJul 31, 2025
  Your GE Microwave Oven might not start due to several reasons. It could be a blown fuse or tripped circuit breaker in your home; in this case, replace the fuse or reset the circuit breaker. A power surge could also be the cause; unplug the microwave oven, then plug it back in. Ensure the 3-prong plug on the oven is fully inserted into the wall outlet. Also, make sure the door is securely closed by opening the door and closing it again securely.
S
Sarah PerryAug 6, 2025
What to do if GE PEB2060 control panel is lighted, yet oven will not start?
- S
  Shane BradyAug 6, 2025
  If the control panel of your GE Microwave Oven is lit but the oven won't start, consider these possibilities: * Ensure the door is securely closed. * Press the START pad after making your cooking selection. * If another selection is already in the oven, press CLEAR/OFF to cancel it. * If you pressed TIME COOK, make sure you entered the cooking time. * If you accidentally pressed CLEAR/OFF, reset the cooking program and press START. * If you selected AUTO DEFROST, ensure you entered the food weight. * If the oven was accidentally paused, press START to restart the cooking program.
M
Mark SimonAug 11, 2025
How to unlock the control panel on a GE Microwave Oven?
- C
  Crystal CarneyAug 11, 2025
  If the control panel on your GE Microwave Oven does not work, it may have been locked. To unlock it, press and hold the CLEAR/OFF button for about three seconds.
R
Rachel BrownAug 18, 2025
What to do if food amount is too large for Sensor Reheat in GE PEB2060?
- M
  Matthew TaylorAug 18, 2025
  If the food amount is too large for Sensor Reheat on your GE Microwave Oven, it is because Sensor Reheat is designed for single servings of recommended foods. For larger amounts of food, use the Time Cook function instead.
J
Joshua CaseyAug 25, 2025
What to do if SENSOR ERROR message appears on GE PEB2060 Microwave Oven display?
- B
  batesjessicaAug 25, 2025
  If you see a SENSOR ERROR message on your GE Microwave Oven display, it could be because the door was opened or START/PAUSE was pressed during the Sensor cooking program before steam was detected. In this case, close the door and press START immediately. Alternatively, steam might not have been detected in the maximum amount of time. If this occurs, use Time Cook to heat for a longer duration.