GE Profile J2B918 User Manual

Burner Heads (on some models)
Place burner heads over the electrodes
on the cooktop, in the correct locations
according to their size. There is one small,
one medium, one large and one extra large
burner head.
Oval (Center) Burner Head/Cap Assembly
Place the oval (center) head/cap assembly
over the electrode on the cooktop.
Caps
Place the matching size caps onto the burner
bases or heads.
Make sure that the heads and caps are
replaced in the correct locations.
Grates
Place the left, right and center grates on the
cooktop. These grates are position specific.
The undersides of the left and right grates
are marked “LEFT FRONT” and “RIGHT
FRONT.” Place the middle grate with its
bowed front toward the front of the range.
CAUTION: Do not operate the burner
without all burner parts in place.
Check Ignition of Surface Burners
Operation of all cooktop burners should be
checked after the range and gas supply lines
have been carefully checked for leaks.
Electric Ignition
Select a top burner knob and simultaneously
push in and turn to LITE position. You will hear
a clicking sound indicating proper operation of
the spark module. Once the air has been purged
from the supply lines, burners should light within
4 seconds. After burner lights, rotate knob out of
the LITE position. Try each burner in succession
until all burners have been checked.
50
Installation of the range.
Seal the Openings
Seal any openings in the wall behind the range
and in the floor under the range when hookups
are completed.
Assemble Surface Burners
Operating Instructions Safety InstructionsInstallation Instructions
Troubleshooting Tips
Consumer Support
Medium head
Front of range
Large head
Small head
Extra large head
Electrode
Slot
Front of range
Oval head and cap
assembly
Medium cap
Front of range
Large cap
Small cap
Extra large cap
Make sure the slot in the
burner head is positioned
over the electrode.
Left Front
Right Front
Center
Make sure the slot
in the burner head is
positioned over the
electrode.
Electrode
Slot

GE Profile J2B918 Specifications

General

Brand	GE
Model	Profile J2B918
Category	Ranges
Language	English