Need help?Do you have a question about the GE Profile J2S968 SERIES and is the answer not in the manual?
Instructions for properly reattaching grounding devices after service to ensure electrical safety.
Describes how to use the various buttons on the oven control panel for different functions.
Explains how to adjust the audible tone volume for oven operations.
Describes how to change clock display settings, including 24-hour format and blackout.
Explains how the Auto Recipeâ„¢ feature automatically converts baking temperatures for convection.
Step-by-step instructions for setting the correct time on the oven clock.
Instructions for setting the minute timer for various cooking durations.
Steps to set the oven to start cooking immediately and turn off automatically.
Instructions for setting the oven to start cooking at a later time and turn off automatically.
Detailed steps for using the meat probe with the roasting function.
Instructions for using the meat probe with convection roasting.
Steps to set convection cooking to start immediately and stop automatically.
Instructions for setting convection cooking to start later and stop automatically.
Step-by-step instructions for initiating convection cooking.
Detailed steps for using the oven's proofing feature for dough.
Instructions for using the oven's warming feature to keep food hot.
Method for using the oven to crisp stale food items.
Step-by-step guide to adjust the oven thermostat setting.
Detailed steps to initiate the self-cleaning cycle.
Instructions for scheduling the self-cleaning cycle to start at a later time.
Steps to set the oven for baking/roasting using the Sabbath feature.
Instructions for timed baking/roasting with the Sabbath feature.
Procedure to disable or exit the Sabbath mode.
Diagram showing component locations on the Dual Fuel range top.
Diagram showing component locations on the All Gas range top.
Identifies internal components visible from the rear of the Dual Fuel range.
Identifies internal components visible from the rear of the All Gas range.
Shows the bottom view of the maintop burner assembly, highlighting components.
Shows the top/front view of the maintop burner assembly, highlighting components.
Explains the construction of the oven door assemblies and how they separate.
Provides instructions and safety warnings for removing and servicing the oven door.
Explains the glow-bar ignition system for All Gas ovens and key operating points.
Discusses the glow-bar igniter, its types, and troubleshooting for ignition issues.
Provides instructions for removing and replacing the broil burner glow-bar igniter.
Provides instructions for removing and replacing the bake burner glow-bar igniter.
Steps to perform a test on bake and broil burner flames for proper operation.
Instructions for adjusting the broil burner flame for optimal performance.
Information regarding flame characteristics for LP and Natural Gas installations.
Diagram and description of the convection fan assembly for Dual Fuel ranges.
Diagram and description of the convection fan assembly for All Gas ranges.
Details the timing parameters for convection fan operation in seconds.
Details the keypanel and ERC components and their testing.
Describes how to test the functionality of the key panel buttons.
Pinout diagram for the ERC on All Gas ranges with convection fans.
Pinout diagram for the ERC on Dual Fuel ranges with convection fans.
Discusses adjustments and checks for surface burner flame characteristics.
Explains how to check and adjust the alignment of the maintop burner components.
Instructions for adjusting the low flame setting on cooktop burners.
Specifies cooling fan timing for JGS968 model.
Specifies cooling fan timing for J2S968 model.
Specifies cooling fan timing for JGSP48 model.
Details the bake thermal switch, its operation, and conditions for cancellation.
Wiring diagrams for the door lock circuit on JGS968 & J2S968 models.
Wiring diagrams for the door lock circuit on JGSP48 models.
Details the sequence of events during the oven's self-cleaning cycle and door locking.
Lists and explains oven failure codes and their corresponding corrections.
Calibration settings and voltage/ohm checks for Dual Fuel ranges.
Voltage and switch contact checks for All Gas ranges.
Steps to adjust the pressure regulator for LP gas conversion.
Instructions for adjusting the bake burner orifice for LP gas conversion.
Instructions for adjusting the broil burner orifice for LP gas conversion.
Recommended initial air shutter settings for LP and Natural Gas.
How to check and verify the flame size for bake and broil burners.
Procedures for adjusting the low flame setting on cooktop burners.
Wiring diagram for the JGSP48 All Gas range without a convection fan.
To Next Page
General