Light Bulb Replacement
To replace the bulb (s), first discon-
nect the power at the main fllse or
circuit breaker panel or pull the
plug.
Remove the screw at the front of
the light cover and lower the cover.
Replace with 40-watt tubular bulbs.
Order WB36X936 from your GE
supplier. Tubular 40-watt bulbs
(40T6_A,/2), available in supermar-
kets and hardware stores, may also
be used for replacements.
Replace the screw. Connect electri-
cal power to the oven.
REMOVE SCREWS
Be sure the bulb(s) to be replaced
are cool beR)re removing. After
breaking the adhesive seal, remove
the bulb by gently turning.
To replace the oven light, first dis-
connect the power at the main fllse
or circuit breaker panel or pull the
plug.
Remove the top grille by taking out
the 2 screws that hold it in place.
Next, remove the two screws locat-
ed above the door near the center
of the oven that secure the light
housing.
Replace the burned-out bulb
with a 30-watt incandescent bulb
(WB02X4235), available from your
GE supplier.
39
To Next Page
Loading...
Need help?
General
