GE RM24970 - Surround Sound Feature

8
The surround sound feature may be turned ON/
OFF by pressing the SURR ON•OFF button.
Surround Sound Feature
1. Press the SURR MODE button
until the desired mode is found.
2. Press DELAY+ or DELAY- to achieve the
desired delay affect.
3. Press the DSP ON•OFF button to
turn DSP (Digital Sound Processor)
ON or OFF.
4. Press the DSP mode button until the
desired effect is achieved.
5. Press the TEST button to listen to
speaker levels.
6. Press FRONT, CENTER, or REAR
LEVEL- buttons to adjust speaker
levels.
buttons to select
speakers.
7. Press the LEVEL+ or