Preventive Maintenance
2097937-002 Rev G T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V 63
11 March 2019
Running Deck Maintenance
The treadmill’s running deck is maintenance–free and offers two
running deck surfaces for double the life of ordinary treadmills.
NOTE:
Do not use any silicone or lubricating sprays during
preventative maintenance on your treadmill deck. Using
such sprays may void the warranty. Using such sprays can
bring about surface changes that may result in hesitation
or excessive belt slip.
Prolonged use in high speed running may cause
hesitation/slippage on each foot plant. Inspect the running
deck for factory lubrication on running surface. For
troubleshooting refer to “Running Belt High Speed
Application” on page90.
If the running deck surface becomes grooved due to wear,
it can be renewed by flipping the deck to the opposite side.
Notify your in-house biomedical technician, or contact GE
Medical Systems Information Technologies, Inc., and open a
customer service call.
To Next Page
Loading...
Need help?
General
