To Next PageTo Next Page
Need help?Do you have a question about the GE UCC15NPRII and is the answer not in the manual?
Essential safety warnings and precautions for operating the ice machine.
Warnings related to flammable refrigerant and explosion risks.
Instructions for safe electrical connection and proper grounding procedures.
Safety guidelines for disposing of the old ice machine to prevent entrapment.
Guidance on removing packaging and understanding the ice machine's control panel.
Steps for connecting the ice machine to Wi-Fi and the SmartHQ app.
FCC/IC compliance statements and information for radio communications.
Overview of ice machine features and the procedure for initial operation.
Instructions on proper grounding and selecting an indoor location.
What to do before starting, governing codes, and machine specifications.
Planning considerations, cutout dimensions, and product size requirements.
Detailed steps to change the door swing direction of the ice machine.
Procedures for attaching standard or custom door panels to the appliance.
Steps to reverse the orientation of the door handle.
Instructions for installing the UPK4 drain pump kit.
Instructions for setting up the gravity drain system.
How to adjust the toe kick for proper alignment with cabinets.
Information on connecting the water supply line and shut-off valve.
Kit contents, required tools, and preparation before installing the drain pump.
Safety precautions and steps to remove covers for drain pump installation.
Instructions for installing drain tubing and the drain pump unit.
Connecting the drain pump to the ice machine and completing the installation.
Performing pump operation checks and finalizing the installation.
Procedures for replacing the water filter cartridge and using a bypass plug.
How to clean the stainless steel exterior and the unit's condenser.
Step-by-step guide to cleaning the ice machine's internal components.
Instructions for preparing the machine for storage or periods of non-use.
Solutions for low ice rate, incomplete cubes, and no ice production.
How to address 'Time to Clean' alerts and water backing up.
Explains the typical sounds produced during the ice-making cycle.
Details on warranty periods, what GE Appliances will replace.
Items and conditions not covered by the limited warranty.
Information on available door panels and handle kits for customization.
Details about the UPK4 drain pump kit for gravity drain conversion.
Accessing the GE Appliances website for support and appliance registration.
How to schedule repair service and purchase extended warranty plans.
Information on ordering parts and contacting consumer relations.
Essential safety warnings and precautions for operating the ice machine.
Warnings related to flammable refrigerant and explosion risks.
Instructions for safe electrical connection and proper grounding procedures.
Safety guidelines for disposing of the old ice machine to prevent entrapment.
Guidance on removing packaging and understanding the ice machine's control panel.
Steps for connecting the ice machine to Wi-Fi and the SmartHQ app.
FCC/IC compliance statements and information for radio communications.
Overview of ice machine features and the procedure for initial operation.
Instructions on proper grounding and selecting an indoor location.
What to do before starting, governing codes, and machine specifications.
Planning considerations, cutout dimensions, and product size requirements.
Detailed steps to change the door swing direction of the ice machine.
Procedures for attaching standard or custom door panels to the appliance.
Steps to reverse the orientation of the door handle.
Instructions for installing the UPK4 drain pump kit.
Instructions for setting up the gravity drain system.
How to adjust the toe kick for proper alignment with cabinets.
Information on connecting the water supply line and shut-off valve.
Kit contents, required tools, and preparation before installing the drain pump.
Safety precautions and steps to remove covers for drain pump installation.
Instructions for installing drain tubing and the drain pump unit.
Connecting the drain pump to the ice machine and completing the installation.
Performing pump operation checks and finalizing the installation.
Procedures for replacing the water filter cartridge and using a bypass plug.
How to clean the stainless steel exterior and the unit's condenser.
Step-by-step guide to cleaning the ice machine's internal components.
Instructions for preparing the machine for storage or periods of non-use.
Solutions for low ice rate, incomplete cubes, and no ice production.
How to address 'Time to Clean' alerts and water backing up.
Explains the typical sounds produced during the ice-making cycle.
Details on warranty periods, what GE Appliances will replace.
Items and conditions not covered by the limited warranty.
Information on available door panels and handle kits for customization.
Details about the UPK4 drain pump kit for gravity drain conversion.
Accessing the GE Appliances website for support and appliance registration.
How to schedule repair service and purchase extended warranty plans.
Information on ordering parts and contacting consumer relations.
General| Type | Undercounter Ice Maker |
|---|---|
| Height | 33.5 inches |
| Storage Capacity | 26 lbs |
| Ice Type | Nugget |
| Voltage | 115V |
| Refrigerant | R134A |
| Ice Production | 15 lbs per day |
| Installation | Built-In/Freestanding |
