GE VersaMax IC200CHS022 - Page 298

GFK-1504N Chapter 9 Discrete Mixed Modules 9-39
9
IC200MDD848
Mixed Module, Output 120 V AC 0.5A per Pt Isolated 8 Points /
Input 120 V AC Grouped 8 Points
Module Specifications
Module Characteristics
Points
8 Positive AC Inputs, one group.
8 Individually-isolated Outputs.
Module ID
88048840
Isolation:
User input/output to logic
(optical) and frame ground
Group to group
Point to point
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
Outputs: 250 V AC continuous; 1500 V AC for 1 minute
Inputs: none
LED indicators One LED per point shows individual point on/off state
OK LED indicates backplane power is present
Backplane current consumption
5V output: 125mA maximum
Thermal derating
Refer to diagram
Compatibility
PME programming
software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW,FW vers.
FW release
All
AA
1.0
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
Input Characteristics
Input voltage
0 to 132 V AC (47 to 63Hz), 120 V AC nominal
On state voltage 70 to 132 V AC
Off state voltage
0 to 20 V AC
On state current
Off state current
5mA minimum
2.5mA maximum
On response time
Off response time
1 cycle maximum
2 cycles maximum
Input impedance 8.6kΩ (reactive) at 60Hz, typical
10.32kΩ (reactive) at 50Hz, typical
Output Characteristics
Output voltage
85 to 132 V AC (47 to 63Hz), 120 V AC nominal
Output voltage drop
2.0V maximum
Load current
10mA minimum per point
0.5A maximum per point
5.0A for one cycle (20ms) maximum inrush
Output leakage current
Less than 2mA at 132 V AC
On response time
Off response time
Less than ½ cycle, maximum
Less than ½ cycle, maximum
Protection Snubber and MOVs (each output)
Diagnostics
None