GE VersaMax IC200CHS022 - Page 318

GFK-1504N Chapter 10 Analog Input Modules 10-3
10
IC200ALG230
Analog Input Module, 12 Bit Voltage/Current 4 Channels
Module Specifications
Module Characteristics
Channels
4 single ended, one group
Module ID
FFFF9004
Isolation:
User input to logic (optical) and to frame
ground
Group to group
Channel to channel
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
None
LED indicators
INT PWR LED indicates internally-generated field power is
present. OK LED indicates backplane power is present
Backplane current consumption
5V output: 125mA maximum
External power supply
None
Thermal derating
None
Configuration parameters
Range select, Mode select (jumpers on carrier)
Diagnostics
Loss of Internal Power
Compatibility
PME programming
software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW, FW vers.
FW release
All
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
AA
1.0
Input Characteristics: Voltage Mode (default)
Input voltage:
Bipolar: ±10 V DC (default)
Unipolar: 0 to 10V (configurable)
Input Impedance
126 kΩ maximum
Accuracy at: 25 °C
†
0 to 60 °C
±0.3% typical of full scale, ±0.5% maximum of full scale
±1% maximum of full scale
Resolution: Bipolar mode:
Unipolar mode:
2.5mV = 8 counts
2.5mV = 8 counts
Filter response
5.0ms
Update rate per module
0.4ms
Common mode voltage
0 V
Channel-to-channel crosstalk rejection
30dB minimum
Input Characteristics: Current Mode
Input current
4 to 20mA
Input Impedance
200 Ω maximum
Accuracy at: 25 °C
†
0 to 60 °C
±0.3% typical of full scale, ±0.5% maximum of full scale
±1% maximum of full scale
Resolution
4µA = 8 counts
Filter response
5ms
Update rate per module
0.4ms
Channel-to-channel crosstalk rejection
30dB minimum
†
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be degraded to ±3%.