GE VersaMax IC200CHS022 - Page 350

GFK-1504N Chapter 10 Analog Input Modules 10-35
10
IC200ALG263, IC200ALG265
Analog Input Module, 15 Bit Voltage 15 Channels
Module Specifications
Module Characteristics
Channels
15 single ended, one group
Module ID
FFFFB00F
Isolation:
User input to logic (optical) and
to frame ground
Group to group
Channel to channel
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
None
LED indicators
OK LED. See "LED Indicators" for description.
Backplane current consumption IC200ALG263: 5V = 150mA maximum
IC200ALG265: 5V = 150mA, _3.3V = 50mA maximum
External power supply
None
Thermal derating
None
Configuration parameters
None
Diagnostics Loss of Internal Power
A/D conversion malfunction greater than 6% of full scale
Compatibility
PME programming
software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW, FW vers.
FW release
All
CE
2.1
AB
2.1
AA
2.1
AA
2.1
No
AB
1.1
BF
2.2
CF
2.2
Input Characteristics
Input voltage
-10V to +10V
Input fault withstand
IC200ALG263: ±10V; IC200ALG265: ±30V
Input Impedance
100K Ω minimum
Accuracy at:
25 °C
†
0 to 60 °C
±0.3% typical of full scale, ±0.5% maximum of full scale
±1% maximum of full scale
Resolution ± 15 bits
0.3125mV = 1 count
Filter response (3dB Corner Freq)
32 Hz ±20%
Update rate per module
7.5ms
†
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be
degraded to ±2%.