4-10 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
4
IC200CHS003
Connector-Style I/O Carrier
Field Wiring Connection
I/O devices can be wired directly to Interposing I/O Terminals, described
separately in this chapter, or other types of terminal strips.
Connection to the Connector Style I/O Carrier is made by cable. The following
cables are available:
IC200CBL105 2 connectors, 0.5m, no shield
IC200CBL110 2 connectors, 1.0m, no shield
IC200CBL120 2 connectors, 2.0m, no shield
IC200CBL230 1 connector, 3.0m, no shield
The notch on the connector indicates the orientation of the pins.
A connector kit is available for building custom cables. The kit is part number
IC200ACC304.
The carrier accommodates current levels up to 2 A per point or 8 A per each
power and ground, and a voltage range of up to 264 V AC. Voltage transients
up to 300 V AC will not damage the carrier.
Compatibility
This carrier can be used with all VersaMax I/O modules EXCEPT the following,
due to their high isolation requirements:
IC200MDL144 Input 240 V AC 4 Point Isolated Module
IC200MDL244 Input 240 V AC 8 Point Isolated Module
IC200MDD850 Mixed 240 V AC Isolated 4 Point / Output Relay 2.0 A
Isolated 8 Point Module
To Next Page
Loading...
