Connecting Your VCR
Refer to these pages to help you connect your VCR.
Jacks and Cables
RFJacks and Coaxial Cables (F-type)
The RF jacks p_vide good picture and mono sound quality,
and must be used if audio/video connections are not available
for your TV.
These jacks are required for antenna or cable-TV connections.
The RF jacks on the VCR ae labeled IN (FROM ANT) and OUT
(TO TV). The coaxial cable supplied with your VCR is used to
connect the VCR's OUT (TO TV) jack and your TVs' antenna
input.
O
RFJack
Audio/Video Jacks and Cables (RCA-type)
The AUDIO/VIDEO jacks provide very good picture quality and
mono sound, and can be used if yourTV has audio/video input
jacks.
These jacks are used for most audio/video connections
between components. The VCRAUDIO/VIDEO jacks are color
coded (yellow for video and white for audio). If your TV has
two inputs for audio (stereo), you may need a Y-adapter to
hear sound from both channels.
O
Audio/Video Jack
46
To Next Page
