Back Panel
CH 3,1_4 Switch Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using one of
the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the VCR's remote to select L to record
from these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a TV or VCR, when it is connected to
these jacks.
IN (FROM ANT.) Jack Receives a signal from an antenna or
cable system when attached.
OUT (TO TV) Jack Passessignal to TV using the cable supplied.
54
To Next Page
Loading...
