Please refer to User Manual for full details on AFI
Please refer to User Manual for full details on AFI
(AFI – cont.)
Store
1. To store quad and bull’s eye traces screen, press Image store (screen
shot only, not raw data)
2. To store the bull’s eye, press Exit, prompts to store bull’s eye, press Yes
(this is stored in raw data), this transfers the measurement to the worksheet
3. Exit AFI folder
(AFI - cont.)
New color map
1. Once AFI is performed, bull’s eye is displayed on the screen
2. Press BE maps
3. Select the BE maps and choose the map
you want to be displayed on the screen
AFI
To Next Page
Loading...
