Tri-plane AFI
(Tri-plane AFI – cont.)
To Store
1. Quad screen and bull’s eye traces screen, press Image store (screen shot
only, not raw data)
2. The bull’s eye, press Exit, message will show “Do you want to store Bull’s
Eye?” press Yes (stored as raw data) and measurements are transferred
to the worksheet
Note: Further details for Triplane AFI, please refer to User’s Manual
(Tri-plane AFI – cont.)
Analysis
1. Default screen is BE + traces
2. Other choices on touch panel for display are:
– Single displays Apical 2Ch loop with GS
– Quad displays Apical 2 Ch loop with GS, regional PSS, tracing and
curved AMM
– BE Only – Bull’s eye display
– BE+Review – displays triplane apical views and BE
To Next Page
Loading...
