GE Vivid E9 - Page 64

Configuration of Footswitch
and 6VT-D Probe
Configuration of the 6VT-D probe
1. Select Utility on the touch panel
2. Select Config button
3. While on Config go to Imaging
4. Select TEE probe tab
(Configuration of the 6VT-D Probe – cont.)
Live or Freeze
1. Define what functions are available in Live mode or while in Freeze mode
2. Freeze mode functionality when:
Press Freeze
Press Image store or
previous cycle
Note: Configuration of the TEE button is NOT preset dependent unlike
Footswitch configuration. The button configuration is a general set-up
for all presets running on the TEE probe
The 6VT–D probe has
three buttons that can
be configured
6VT-D probe Functions that can be selected
•Nofunction
•ImageStore
•RotateLeft
•RotateRight
•Rotate90
•Previouscycle
•Nextcycle
•Freeze
•QuickRotate