V-Planes
1. While in Biplane, press V-Plane
on touch panel.
Image is still in biplane and both planes are now in 0°
position
2. Move the trackball up/down to tilt the second plane
either back and forth
Biplane Tilt and Rotate
In biplane mode, by default planes are orthogonal to each other starting at
0°/90°
Press Quick rotate, planes are still orthogonal in position but can be rotated
to a different angle
Default 0°/90°, 30°/120° Tilt With rotation of 30° clockwise
Default
Tilted
4D Workflow Tools
To Next Page
Loading...
