GE Voluson 730Expert - Section 4-4 Functional Checks

GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
Chapter 4 - Functional Checks 4-7
Section 4-4
Functional Checks
For a basic functional check of the system’s different modes, following pages will familiarize you with
image optimization for:
• 2D Mode (B Mode), see: Section 4-4-1 on page 4-8
• Additional (optional) Operating Modes, see: Section 4-4-2 on page 4-10
-B-Flow
-XTD-View
• M Mode, see: Section 4-4-3 on page 4-11
• Spectral Doppler Modes, see: Section 4-4-4 on page 4-12
- PW - Pulsed Wave Doppler
- CW - Continuous Wave Doppler
• Color Doppler Modes, see: Section 4-4-5 on page 4-13
- CFM - Color Flow Mode
- PD - Power Doppler
- TD - Tissue Doppler
• Volume Modes, see: Section 4-4-6 on page 4-15
-3D Static
- 4D Real Time
- 4D Biopsy
- VCI - Volume Contrast Imaging (A-Plane, C-Plane)
- DiagnoSTIC - Fetal Cardio
-VOCAL
NOTE: Some software may be considered standard depending upon system configuration.
If any Modes or Options are not part of the system configuration, the check can be omitted.
NOTE: Different menus are displayed depending on which Touch Panel Menu and which Mode is selected.
Some function keys only appear on the Touch Panel if they are available for the selected probe.