Need help?Do you have a question about the GE Voluson P8 BT16 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Model | Voluson P8 BT16 |
| Manufacturer | GE Healthcare |
| Application | Obstetrics, Gynecology, General Imaging |
| Transducer Ports | Multiple |
| Connectivity | DICOM, USB, Ethernet |
| Imaging Modes | Color Doppler, Power Doppler |
| Display | LCD |
| Probes | Various |
| Portability | Portable |
| Dimensions | Varies based on configuration |
| Power Requirements | 100-240 V AC |
Safety warning regarding manual consultation and understanding for English users.
Safety warnings in French, German, Spanish, Portuguese, Italian, Estonian, Finnish, Greek, Hungarian, Icelandic, Czech, Danish, Dutch, Latvian, Lithuanian, Norwegian, Serbian, Romanian, Russian, Slovak, Swedish, Turkish, Polish, and Ukrainian.
Indicates severe personal injury or death hazard if instructions are ignored.
Indicates severe personal injury and property damage hazard if instructions are ignored.
Lists all products and their name brands as trademarks of their respective holders.
States the copyright information for the material.
Provides an overview of Chapter 1, describing its purpose and the service manual's scope.
Details conventions used in the manual, including model designations, icons, and safety messages.
Outlines crucial safety precautions for operating and servicing the Voluson P8/P6 system.
Explains electromagnetic compatibility and compliance requirements for the system.
Provides contact information and necessary details for technical support.
Outlines information required for planning and preparing the installation of the Voluson P8/P6.
Details environmental and electrical requirements for the ultrasound system console.
Specifies purchaser responsibilities and mandatory site requirements for the installation.
Provides information for setting up, receiving, unpacking, and configuring the equipment.
Offers important reminders for setup, including installation time and safety precautions.
Details procedures for receiving and safely unpacking the ultrasound system and accessories.
Covers verification of customer orders and system components, and EMI protection.
Outlines hardware installation procedures for connecting auxiliary devices and peripherals.
Provides instructions for connecting the unit to a power source and the boot-up process.
Details the procedures for installing digital, network, and DeskJet printers.
Describes the installation procedure for the Cellular Modem Kit.
Explains how to modify system parameters and settings through major groups.
Refers to Chapter 9 for part numbers of probes used with the system.
Refers to Section 3-9-1 for system setup details.
Describes communication and connection options with other devices via TCP/IP.
Provides instructions for TCP/IP and wireless network configuration.
A worksheet to record required information for connectivity setup.
Details documentation requirements for peripherals and system manuals.
Provides procedures for checking major functions and system diagnostics.
Lists necessary equipment for functional checks, including media and transducers.
Outlines general procedures for system power on/boot up and shutdown.
Details basic functional checks for system modes, system controls, and peripherals.
Describes procedures for saving and loading system configurations and image archives.
Provides checks for system setup in General Settings, Administration, and Connectivity.
Details checks for peripherals, including printers, ECG, and console positioning.
Describes how to transition between different imaging modes like B Mode, M Mode, and Doppler.
Provides a template for documenting site-specific information related to service and maintenance.
Explains system concepts, component arrangements, and subsystem functions.
Provides an overview of the system's capabilities, operating modes, and major components.
Details the components and block diagrams of the Front End Processor.
Outlines the components and block diagrams of the Back End Processor.
Describes the internal input/output connections of the system.
Details the OPIO block diagram, layout, and button descriptions for user interaction.
Refers to Section 5-8 for monitor setup details.
Explains how to change monitor settings through the utility page.
Describes the external input/output connectors on the system.
Lists and describes various peripherals and their installation.
Explains the ACFE primary power module and DPS block diagrams.
Describes InSite Exc for remote diagnostics and access control.
Details the Common Service Desktop software modules and access methods.
Covers specific software/hardware test modules, system setup, and updates.
Explains functions available from the boot screen, including Voluson and GE-Service.
Lists frequently used tools within the Windows Start menu for GE field engineers.
Describes the Voluson Maintenance System for service functionality and PC Memtest.
Explains how to test and adjust mechanical capabilities of the system.
Describes verification of regulatory information and tests required by national law.
Refers to Section 5-8 for details on changing monitor settings.
Details how to configure the keyboard layout and replace keys.
Describes tools and software for maintaining image quality and system operation.
Explains how to gather necessary system information for malfunction analysis.
Details how to check power supply and verify green LED status on the backplane.
Covers capturing screens, network logs, and exporting system data.
Allows GE technicians remote access for diagnostics and system modification.
Guides on using the Auto Tester program for recording processes and saving scripts.
Describes automatic and manual diagnostic tests for various hardware components.
Details how to boot the system without ultrasound hardware and check CPU code name.
Provides troubleshooting steps for console and keyboard functions.
Offers troubleshooting trees, instructions, and tech tips for common issues.
Lists common error messages, their reasons, and recommended actions.
Contains replacement procedures for various system modules and subsystems.
Details procedures for updating system software via DVD or InSite connection.
Guides on verifying system setup, application software, and basic functional checks.
Describes loading procedures for image settings.
Explains procedures for loading full system configurations.
Details procedures for loading image archives.
Lists available software options and procedures for activating them.
Provides steps for replacing the front cabinet bezel assembly.
Details the procedure for replacing the front DVD plastic bezel assembly.
Outlines steps for replacing the front printer bezel assembly.
Provides instructions for replacing the top cabinet cover plastic.
Details the procedure for replacing the front pedestal cover.
Outlines steps for replacing the tray pedestal cabinet plastic.
Provides instructions for replacing the rear cabinet bezel assembly.
Details the procedure for replacing the encoder set.
Outlines steps for replacing the power ON/OFF key PCB assembly.
Provides instructions for replacing the top keyboard assembly.
Details the procedure for replacing the OPIO button set.
Outlines steps for replacing the OPIO plastic lower cover assembly.
Provides instructions for replacing the OPIO plastic upper cover assembly.
Details the procedure for replacing the monitor.
Outlines steps for replacing the monitor arm.
Provides instructions for replacing the LCD cable.
Details the procedure for replacing the ASSY bumper base rubber.
Outlines steps for replacing the OPIO.
Provides instructions for replacing the speaker.
Details the procedure for removing the pedestal bottom cover.
Outlines steps for replacing the nest.
Provides instructions for replacing the air filter.
Details the procedure for replacing the probe holder kit.
Outlines steps for replacing the left side cover assembly.
Provides instructions for replacing the right side cover assembly.
Details the procedure for replacing the trackball.
Outlines steps for replacing the TGC board.
Provides instructions for replacing the AN keyboard assembly.
Details the procedure for replacing the caster cap.
Outlines steps for replacing the caster.
Provides instructions for replacing the side cabinet tray.
Details the procedure for replacing the rear handle.
Outlines steps for replacing the speaker cover.
Provides instructions for replacing the DPS/DPS with battery.
Details the procedure for replacing the DRFM.
Outlines steps for replacing the SOM in DRFM.
Provides instructions for replacing the HDD in DRFM.
Details the procedure for replacing the DBM64.
Outlines steps for replacing the T-DPI.
Provides instructions for replacing the CSI.
Details the procedure for replacing the CBP.
Outlines steps for replacing the DVD.
Provides instructions for replacing the OPIO USB Sub PWA.
Details the procedure for replacing the AN key top.
Covers procedures for replacing optional peripherals and accessories.
Outlines steps for replacing the FAN with Cable Assy II.
Provides guidelines for functional checks after FRU replacement.
Refers to installation instructions for UVC part replacement.
Details the procedure for replacing the CWD piggy.
Outlines steps for replacing the ECG kit assembly.
Provides instructions for replacing the battery pack assembly.
Details the procedure for replacing the wireless LAN adapter.
Provides an overview of replacement parts available for the system.
Lists common abbreviations used in the renewal parts section.
Organizes mechanical and user-accessible parts into groups.
Illustrates various plastic covers for the system.
Details the components and part numbers for the LCD monitor.
Lists part numbers and descriptions for OPIO components.
Shows images and part numbers for nest box components.
Lists mechanical parts with their descriptions and part numbers.
Details available software options and their compatibility.
Lists and illustrates optional peripherals and accessories.
Provides a list of available system manuals with part numbers.
Lists and categorizes available probes with part numbers and compatibility.
Illustrates and lists various power cords with part numbers.
Shows and lists biopsy needle guides with part numbers and descriptions.
Discusses periodic maintenance inspections and the purpose of the chapter.
Explains the importance of maintaining records and quality assurance.
Specifies how often care and maintenance tasks should be performed.
Lists the necessary tools, supplies, and equipment for care and maintenance.
Outlines preliminary checks and system checks for maintenance.
Describes the use of a phantom for Quality Assurance Program tests.
Covers electrical safety tests based on IEC60601-1 standard.
Provides troubleshooting steps for excessive leakage current issues.
To Next Page
