GE Voluson P8 BT16 - 4-7-2 Control Console Positioning; 4-7-2-1 Assembly procedure for converting Voluson P8; Voluson P6 from Low Version to High Version

GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 4 - Functional Checks 4-27
4-7-2 Control Console Positioning
The control console can be adjusted to a fixed height (910 mm) with an Extender Kit (H46712CE).
4-7-2-1 Assembly procedure for converting Voluson™ P8 / Voluson™ P6 from Low Version to High
Version
1.) Remove 2 RUBBER CAPS on SPEAKER COVER LEFT and RIGHT
Figure 4-28 Removing the RUBBER CAPS
2.) Unscrew 2 screws to remove the SPEAKER COVER LEFT and RIGHT.
Figure 4-29 Unscrewing 2 screws to remove SPEAKER LEFT and RIGHT