GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-31
7-7-3-2 VPD
This diagnostic test performs the self-diagnosis of each vital product data for board or parts.
7-7-3-2-1 DRFM
It verifies VPD information embedded in EEPROM on DRFM board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-2 DBM
It verifies VPD information embedded in EEPROM on DBM board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-3 DPI
It verifies VPD information embedded in EEPROM on DPI board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-4 DPS
It verifies VPD information embedded in EEPROM on DPS board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-5 DC4D
It verifies VPD information embedded in EEPROM on DC4D and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-6 MDM
It verifies VPD information embedded in EEPROM on MDM and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-7 OPIO
It verifies VPD information embedded in EEPROM on OPIO and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-8 BATTERY
It verifies VPD information embedded in EEPROM on BATTERY Pack and displays the part of VPD
information and the test result as PASSED/FAILED.
To Next Page
Loading...
