GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
5-78 Section 5-17 - LINUX - Voluson Maintenance System
5-17-7-3 USBTree
The USB Tree displays connected devices and their respective hub.
This enables easy control, whetherall devices are correctly wired.
5-17-7-4 SmartHDDtest
This item starts the SMART (Self Monitoring, Analysis and Reporting Technology) long test.
It gathers data about the hard disk´s performance and operations, detects and reports various indicators
of reliability, in the hope of anticipating failures.
NOTE: This test takes about 1-3 hours (depending on the HDD size).
5-17-7-5 HDDWipeTool
By means of this function all data (e.g., patient data, archive images, measurement results and reports)
on the hard disk will be removed and overwritten with zeros!
Figure 5-53 USB Tree (example)
!! WARNING:
COMPLETE DATA LOSS ON THE ENTIRE HARD DISK.
There is no possibility to restore the data!!!
This should be performed before sending hard drives/BEPs back to GPRS for PHI data reasons.
To Next Page
Loading...
