GE Voluson P8 BT16 - 8-59-5 Installation Procedure; 8-59-6 Set up WIRELESS LAN; 8-59-7 Functional Test

GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-189
8-59-5 Installation Procedure
1.) Install the new parts in the reverse order of removal.
2.) Perform :
3.) Perform :
8-59-6 Set up WIRELESS LAN
1.) Press Utility -> System setup -> Connectivity -> Device Setup ->WLAN Configuration.
The Wireless Network Configuration tool appears.
2.) Go to Wireless Network tab and check that available Wireless Networks connection list.
3.) Double click the available wireless network resource and edit the network key to connect.
8-59-7 Functional Test
1.) Select Utility -> System setup -> Connectivity -> Device Setup ->WLAN Configuration..
2.) Move to Properties tab and check the MAC Address is shown.
Figure 8-270 Functional Test for WIRELESS LAN