GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
8-148 Section 8-47 - Replacement of the CSI
2.) Unscrew 4 screws to remove CSI board and Separate the LED connector.
8-47-5 Installation Procedure
1.) Install the new parts in the reverse order of removal.
2.) Perform: FRU8-38: Replacement of the CSI - Functional Tests..
Figure 8-210 Seperating LED connector/FAN connector
HDD Status
Network Status
Network Speed
Orange: Megabit
To Next Page
Loading...
