GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
Chapter 4 - Functional Checks 4-29
Section 4-5
Backup and Restore Database, Preset Configurations and Images
1.) On the Touch Panel, touch UTILITIES.
2.) In the Utilities menu, touch SYSTEM SETUP
to invoke the setup desktop on the screen.
3.) Select the
BACKUP page.
The “Backup” page is subdivided in two main groups:
A.) User Settings Only
• Section 4-5-1 "Save User Settings Only (Application Settings)" on page 4-30
• Section 4-5-2 "Load User Settings Only (Application Settings)" on page 4-31
B.) Full Backup
• Section 4-5-3 "Save Full Backup (Presets, Configurations & Application Settings)" on page 4-33
• Section 4-5-4 "Load Full Backup (Presets, Configurations & Application Settings)" on page 4-35
• Section 4-5-5 "Delete Full Backup (Presets, Configurations & Application Settings)" on page 4-37
The User Settings and/or Full Backup can be saved to the following destinations:
• D: partition of internal hard disk
• DVD/CD+(R)W
• MOD (if present)
• Mapped Network Drive Z:
see: Section 3-11-1 "Map Network Drive" on page 3-49
• Any other drive connected to the system (e.g.; an external USB-hard disk)
Note:
This function is only available in the Full Backup utility.
For further details review: Section 3-5-11 "External USB-Devices" on page 3-20.
NOTICE
!! NOTICE:
From Software Version 3.1.x onwards, it is also possible to save/load/delete “Full Backup” data via the
System Setup
BACKUP page; see: Figure 4-22.
Figure 4-22 System Setup - Backup page
NOTICE
!! NOTICE:
When connecting external USB devices, be sure to execute Safety Directions found in Chapter 2 of the
Voluson® 730Expert (BT03) Basic User Manual.
Stop USB Devices
“Full Backup” group
“User Settings Only”
group
To Next Page
Loading...
