Need help?Do you have a question about the GE WCCB1030WYC and is the answer not in the manual?
General| Color | White |
|---|---|
| Steam Function | No |
| Smart Washer | No |
| Energy Star Certified | No |
| Wash Action | Agitator |
| Voltage | 120V |
| Frequency | 60 Hz |
| Model | WCCB1030WYC |
| Type | Top Load |
Provides instructions on locating the mini manual for service information.
Explains the function of the countdown display and its switch settings.
Details the washer's capacity and available spin speeds.
Describes agitation, water levels, and the suspension system.
Covers cabinet construction, service access, and warranty terms.
Provides the physical measurements of the washer unit.
Details water consumption for different wash cycles and temperatures.
Lists essential requirements for proper washer installation.
Illustrates common methods for connecting water and drain hoses.
Details switch settings for the countdown display on WCCD models.
Steps to prepare the washer and attach the drain hose.
Guidance on connecting fill hoses and preparing electrical connections.
Final steps for washer positioning and drain nozzle installation.
Adjusting for economy water usage and setting up warm rinse.
Covers security lock installation and final installer checks.
Critical safety warnings regarding electrical connections and grounding.
Details water pressure, temperature, and shut-off valve requirements.
Final checks for the installer after setup is complete.
Explains the function of the lint filtering system during wash and drain cycles.
Notes on energy-saving rinses and total cycle duration.
Describes the design and serviceability of the control panel.
Step-by-step guide for replacing the display PC board, with safety warnings.
Details the timer's specifications, compatibility, and service parts.
Instructions for accessing the lid switch for service purposes.
Describes the cabinet's material, construction, and leveling legs.
Steps for removing and reinstalling the front panel for service.
Procedures for removing and reinstalling the lid and its components.
Explains how the water pressure switch functions and is adjusted.
Guidance on changing the water level setting to economy mode.
Details the unique design and components of the suspension system.
Step-by-step instructions for removing and replacing suspension parts.
Procedures for removing the agitator, air bell coupling, and spin basket.
Tips for removing and tightening the transmission hub nut.
Steps for removing the tub and motor assembly from the washer.
Describes an alternate procedure for removing the tub/motor assembly.
Instructions for removing and installing the tub seal.
Procedures for removing and replacing the remote pump.
Steps for accessing and servicing the motor and clutch assembly.
Detailed steps for removing and reinstalling the clutch.
Guidance on how to check and adjust belt tension.
Steps for removing the transmission assembly from the washer.
Details on bolts used to mount the transmission to the platform and tub.
Provides a visual explanation of the internal workings of the transmission.
Highlights features like all-metal gears and triple lip seal.
Provides the main electrical schematic for the washer.
Details control switch configurations and PC board terminal assignments.
Emphasizes electrical grounding and wiring compliance.
Shows terminal block configurations and wire assignments.
To Next Page
