GE WCVH4800KWW - Door Lock Release

Door Lock Release
• To release door should a system failure occur:
•
Remove washer top remove control panel remove two Phillips screws
•
Remove
washer
top
,
remove
control
panel
,
remove
two
Phillips
screws
securing top of front panel & pull front panel a few inches outward at top.
• Reach down from the top with the back of your hand against the front panel.
•
With you index finger between the front panel and lock mechanism push
Copyright 2009
47
With
you
index
finger
between
the
front
panel
and
lock
mechanism
,
push
down on the horizontal part of the lock release as you pull open the door.