EasyManua.ls Logo

GE WSXH208 - Operation and Noise Problems; Performance Issues

GE WSXH208
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Beforeyou call forservice...
Possible Causes What To Do
Washerpauses in cycle The washer normally pauses
between washing steps
Washer_ Washer is unplugged * Make sure cord is plugged seemely into a working outlet.
Water supply is turned off * Tmn both hot and coM fhucets fiflly on.
Circuit breaker/fuse is * Check house drcuk breake_/filses. Replace fi_ses or
tripped/blown reset breaker: Washer should have separate outlet.
Controls are not set * Check controls and make sure Cycle knob is pulled out.
properly
Door is open * Close door and pull Cycle knob out.
Dispenser drawer is open * Close drawe_:
Motor is overheated * Washer motor will stop if it becomes overheated. It
will automatically restart after a cool down period of
up to 30 minutes (if washer has not been manually
turned off).
Washerwon'tspin Washer door open Make sure door is dosed.
Dispenser drawer open * Close drawex:
Load is too small * Add one or l_,vosimilar items to help balance tile load.
PossibleCauses WhatToOe
Washerisnoisy Washer is uneven * Make sure washer is level and rests firmly on the floox:
Washer load is unbalanced Push the Cycle knob in to stop the washeL open the
door and redistribute the load evenly. Close tile door
and restart.
High pitch jet engine sound This is n(mnal during tile spin cycle.
Squealing sound or hot _MMler is overloaded. Stop w_Mler and reduce load.
rubber odor
Shipping bolts and foam block * See Installation h_structions for directions to remove
have not been removed shipping bolts and foam block.
Rattling and clanking caused * Check drum for fbreign ot)jects. Turn items with
by foreign objects in tub metal fasteners inside out. (;all authorized servicer to
............................ or pump or metal fasteners inspect pump.
bitting tub
Possible Causes What ToDo
tint or residue on Incorrect sorting * Separate lint producers flom lint collectors.
Washing too long * Excess wash time may create lint.
Detergent not dissolving * Try a liquid detergent.
Use W}tI'IlleY water temperature.
Overloading XMMI dram may be flflly loaded with loosely added items.
Incorrect use of fabric softener * Check fhbtJc soRener package for instructions and fbllow
directions for using dispense_:
18

Other manuals for GE WSXH208

Related product manuals