Need help?Do you have a question about the GEA T.VIS M-20 FDD and is the answer not in the manual?
Specifies the approved applications for the control top T.VIS M-20 FDD and defines misuse.
Outlines prerequisites for safe and reliable operation, including proper handling and adherence to instructions.
Details conditions under which operational safety cannot be guaranteed and operation is prohibited.
Highlights inherent dangers of the component if not used as intended or under impermissible conditions.
Defines the necessary training and qualifications for personnel working with the component.
Presents a detailed view of the control top's components and their designations.
Describes the microprocessor-based operation, position detection, and pneumatic/electronic components.
Explains its function as a control top, operating solenoid valves based on control signals.
Explains the purpose of the type plate and details the meaning of its various code elements.
Provides essential safety principles for personnel performing installation and setup.
Warns about electrical safety requirements for UL compliance and power supply types.
Guides qualified personnel through the process of wiring the 24V DC control top.
Outlines general safety measures for initial commissioning and commissioning phases.
Details the steps for commissioning the control top when it does not have a solenoid valve.
Describes the procedure for commissioning the control top when equipped with a solenoid valve.
Continues the steps for commissioning the control top with a solenoid valve.
Provides safety principles to be followed during the operation of the component.
Lists the "5 safety rules" and general principles for carrying out maintenance and repair work.
Describes the procedure and requirements for detaching the control top from the valve.
Lists common malfunctions, their causes, signalling, and recommended remedies.
Provides a detailed table of spare parts with designations, materials, and part numbers.
General| Type | Flow Meter |
|---|---|
| Model | T.VIS M-20 FDD |
| Manufacturer | GEA |
| Protection Class | IP67 |
| Material (Bearings) | Ceramic |
| Housing Material | Stainless Steel |
| Temperature Range | -20°C to +120°C |
| Material (Housing) | Stainless Steel (1.4404/AISI 316L) |
To Next Page
