What to do if the status LED flashes red on my Geberit AQUACLEAN TUMA CLASSIC?
If the status LED flashes red, it indicates a malfunction has occurred or reinitialisation was unsuccessful. You can try switching off the device, waiting 30 seconds, and then switching it back on.
How to improve cleaning effect of Geberit AQUACLEAN TUMA CLASSIC?
If the cleaning effect of the shower in your Geberit Toilets has weakened, it may be caused by clogged or defective spray nozzles. You should clean or replace the spray nozzles and descale the device.
What to do if the fuse trips repeatedly on Geberit AQUACLEAN TUMA CLASSIC Toilets?
If the fuse or residual-current device in the electrical distributor trips repeatedly when using the Geberit Toilets, it could be due to a defective device. In this case, replace or reset the fuse or residual-current device in the electrical distributor, disconnect the mains plug (if available), and contact customer service.
What to do if Geberit AQUACLEAN TUMA CLASSIC Toilets has a technical defect?
If your Geberit Toilets product has an unknown technical defect, try tripping the fuse or residual-current device in the electrical distributor and disconnecting the mains plug (if available). Then, contact customer service and have the power supply tested by a skilled person.
Why is my Geberit Toilets shower function not reaching the usual temperature?
If the shower function of your Geberit Toilets no longer reaches the usual temperature, it might be due to a dirty shower toilet. Descale the device, switch it off, wait 30 seconds, and then switch it back on.
What to do if the spray arm is not working on Geberit AQUACLEAN TUMA CLASSIC?
If the spray arm on your Geberit Toilets is not functioning correctly, switch off the device, wait 30 seconds, and then switch it back on. This will reinitialize the device.
Why does the fuse trip once on Geberit AQUACLEAN TUMA CLASSIC?
If the fuse or residual-current device in the electrical distributor trips once when you are using Geberit Toilets, it indicates a malfunction. Replace or reset the fuse in the electrical distributor, or reset the residual-current device. The device will initialize again after switching on, and using the device should not trip any fuses or residual-current devices.
What to do if Geberit AQUACLEAN TUMA CLASSIC Toilets is not working normally?
If the shower toilet is demonstrating a fault or is not working as normal, switch off the device, wait 30 seconds, and switch it back on.
Why does the fuse trip repeatedly when using my Geberit Toilets?
If the fuse or residual-current device in the electrical distributor trips repeatedly when the device is used, the device might be defective. Try replacing or resetting the fuse or residual-current device in the electrical distributor and disconnect the mains plug (if available). If the issue persists, contact customer service.
What to do if my Geberit AQUACLEAN TUMA CLASSIC shower function no longer reaches the usual temperature?
If, when using the shower function, the shower toilet no longer reaches the usual temperature, it could be due to a dirty shower toilet. Descale the device. Also, switch off the device, wait 30 seconds, and then switch it back on.
General| Water Spray Temperature | Adjustable |
|---|---|
| Water Spray Intensity | Adjustable |
| Heated Seat | No |
| Remote Control | Yes |
| Odor Extraction | No |
| Energy-saving Mode | Yes |
| Protection Class | IPX4 |
| Nominal Voltage | 230 V AC |
| Mains Frequency | 50 Hz |
| Power Consumption | 2000 W |
| Power Consumption Standby | 0.5 W |
| Operating Temperature | 5-40 °C |
| Spray Time | Adjustable |
| Maximum Load WC Seat | 150 kg |
| Bidet Function | Yes |
| Color | White |
| Product Type | Shower toilet |
| Application Purpose | For comfortable cleaning with water |
| Features | Self-cleaning nozzle |
| Flush Volume | 6 / 3 l |
| Installation Type | Wall-hung |
| Water Connection | Cold water |
| Material | Ceramic |
To Next Page
