Automatic water replacement
If the shower toilet has not been used for more than 2 weeks, the device is rinsed with fresh
water after it is switched on. This ensures optimum shower water quality before usage.
Targeted disinfection
Disinfection is only required if there is a definite risk of infection as a result of germs.
Otherwise, keep to the recommended cleaning intervals and carry out the specified cleaning
activities. → See General cleaning recommendations.
ATTENTION
Aggressive disinfectants
Disinfection using aggressive disinfectants can cause surface damage.
▶ Only use alcohol-based disinfectants that are also suitable for hand and skin disinfection.
▶ Observe the safety notes from the manufacturer when handling hazardous substances.
Type of disinfection Disinfection procedure
Wet wipe disinfection
For use on smooth surfaces that
can be rubbed
▶ Moisten all surfaces with disinfectant.
▶ Allow the disinfectant to take effect according to the
manufacturer information.
▶ Then rub the surfaces with single-use towels.
Caring for and cleaning smooth surfaces
All smooth surfaces can be cleaned hygienically with water and a mild, liquid cleaning agent that is
kind to the skin.
Aggressive and scouring cleaning agents can damage the surface. Only use mild, liquid
cleaning agents that are kind to the skin. The Geberit AquaClean cleaning set (art. no.
242.547.00.1) includes a ready-made cleaning agent that is optimal for cleaning all
Geberit AquaClean surfaces.
Cleaning coated WC ceramic appliances
The WC ceramic appliance has a special coating. This coating draws water drops together to form
spheres which drip away very effectively. Residue such as limescale and dirt is taken up by the
water drops and simply flushed away with them. This effect is very environmentally friendly, as no
aggressive WC cleaning agents are required.
54043197308479499 © 09-2019
967.258.00.0(03)
33
To Next Page
Loading...
Need help?
General
