Geberit ESG 3 - Page 43

EN
Preparing the Geberit ESG3 electrofusion tool for
serial welding
For serial welding, a maximum of three Geberit electrofusion
couplings or Geberit electrofusion tapes ≤ø110mm may
be connected to one another. When serial welding with
different dimensions, the maximum number can be taken
from the following table (see i , page393). Serial welding
cannot be carried out for Geberit electrofusion couplings
with integrated thermal fuse.
▶ Insert the connecting cables as shown in the sketch.
Result
✓ Electrofusion couplings or electrofusion tapes are
prepared for serial welding.
9962820747 © 01-2023
966.473.00.0(03)
43