GeekTale K02 - Installing Exterior Knob; Installing Interior Knob

Note:
The UP faces upwards. After adjusting the Interior Knob, tighten the screwB.
↑
Screwdriver
Battery
cover screw
Step1
Step3
Step2
Screwdriver
Screws B
INSTALLING EXTERIOR KNOB
INSTALLING INTERIOR KNOB
Note:
DO NOT CLOSE THE DOOR
until the door lock i s fully
installed and the batteries
are installed.
Note:
Make sure the knob is installed
c
orrectly with up↑sign postioned
on the top o
f the knob.
Install the spindle Exterior Knob,
Insert the spindle and the standoffs
into the corresponding holes of the
single latch.
Install the Interior Knob. Use a screwdriver to unscrew the battery cover screw.
Connect the exterior knob and Interior knob wirings, Install the Interior Knob.
7
UP
↑