Table of Geely Automobile Initial Maintenance Item 12
Specification and Standard
Based on the rules in the owner’s manual
JL4G18:Conform to GB11121, API quality SJ grade or above, JL δ
-4G20/JLD-4G20/JLD-4G24: Conform to GB11121, API quality SL grade or
above,
Visual-inspect whether there is leakage (oil, fuel, anti-freezer)
Tightened to specified torque, and check for leakage
Generator, water pump tension
(tightness)
Under the pressure of 98N, New belt deflection: 7-9mm, used belt deflection:
11.5-13.5 mm
Check when it is abnormal, until it is troubleshot
Coolant level and leakage
Check for leakage, the radiator expansion tank fluid level shall fall between the
FULL and LOW
Based on the rules in the owner’s manual
Adjust if necessary, when the car is stopped, depress the pedal several times to
remove the vacuum in the vacuum booster, then, use finger to depress the pedal
slowly and slightly until the resistance is felt, measure its free play 1~6mm
AT transmission oil(Optional)
Conform to Standard uchs FES 209-3292, examine shift position is effective or
not, if abnormal, check until problems tackled.
Parking brake travel, effect
Adjust if necessary, the brake is effective when you pull the parking brake by 4~7
clicks with a pull of 196N.
Adjust if necessary, the standard value is 5-15mm