57
SOS Function
In an emergency, you can sound an alarm by pressing
the SOS button (on the rear of the handset) for 3
seconds. An audible alarm will sound and alarm
messages (which you can define) will be sent to
recipients you have specified under this function.
This function includes the following functions, which
you must use to configure your SOS function:
- SOS
1.SOS Mode Setting – choose whether your SOS
message will go out to phone numbers you select
(see Set SOS Number below). You can configure
up to 5 phone numbers. You can alternatively set a
call centre number which will be contacted, or you
can turn this function OFF.
2.Set SOS Number - you can configure up to 5
phone numbers which will be contacted in case
you press the SOS button. The phone will dial
numbers on this SOS list automatically one by one.
If a busy tone is detected or a call is aborted by
user, the next number will be dialled immediately.
The phone will dial these numbers until the
handset is powered off.
SOS
To Next Page
Loading...
