Geevon W22145 User Manual

GEEVON COLOR ATOMIC CLOCK
Item No.W22145
User Manual
Features & Benefits:
DISPLAY UNIT
1. LIGHT/SNOOZE button
2. Radio controlled with WWVB
3. Time display
4. SNOOZE
5. Weekday
6. Calendar
7. Indoor temperature
8. Alarm
9. Indoor humidity
10. Moon phase
11. LIGHT/SNOOZE button
12.UP button
13.Down button
14.Set button
15.Alarm button
16 Wave button
17.Hang hole
18. Stand
19. Battery Compartment
Main features:
1.6 Function buttons: ， ， ， ， ，
2. Radio controlled with WWVB
3. Color display
4. Moon phase display
5. Display time and date
6. Week display
7. Indoor temperature display(℃/℉）: -9.9℃-50℃
8. Indoor humidity display: 20%-95%
9. Alarm with snooze function
10. Time zone
11. Comfort icon
12. Backlight
Setting up power supply Base device
Insert the DC connector into the connection socket
of the base station. Insert the mains plug into the
power outlet. The device is energized directly.
NOTICE! For permanent operation, the mains
power supply is required. Alternatively, a
power supply with batteries is also possible, to
keep the time setting in case of power failure.
NOTICE! When Receiving the RCC, the
backlight will turn off.
Automatic time setting
After the power supply was established, the clock
will automatically search for the radio signal. The
clock will automatically search for the radio signal.
If the clock fails to receive the time signal, go
ahead with the following steps:
1.Press and hold button for approx. 3 seconds
to initialize the radio signal reception again.
2. If the device is still not receiving the signal, the
time must be set manually.
Manual time setting
1.Press and hold button for approx. 3 seconds
to change to time setting mode.
2. Digits to be set are flashing.
3. Press or button to change the value.
4. Press button to confirm and continue to the
next setting.
5. Settings order: 12/24H>Time zone>Hours >
Minutes > Year > Month > Day > DST ON/OFF
6. Finally press the button to save the settings
and exit the setting mode.
Alarm setting
1.Press button to check Alarm .
Thank you for purchasing W22145 Color Atomic Clock
Please take a moment to read this guide and store it for
future reference.

Geevon W22145 Specifications

General

Model	W22145
Category	Clock
Display Type	Digital
Power Source	Battery
Features	Alarm

Summary

Main Features

Function Buttons

Overview of the 6 function buttons: /z, ▲, ▼, , , , and .

Radio Controlled with WWVB

Indicates the clock syncs time via the WWVB radio signal.

Color Display

Highlights the clock's color display feature.

Moon Phase Display

Notes the inclusion of a moon phase display.

Time and Date Display

Confirms the clock displays both time and date.

Week Display

States that the clock shows the current day of the week.

Indoor Temperature Display

Details the range for indoor temperature display (°C/°F).

Indoor Humidity Display

Specifies the range for indoor humidity display (20%-95%).

Alarm with Snooze Function

Indicates the clock has an alarm with a snooze feature.

Time Zone Selection

Mentions the ability to select different time zones.

Comfort Icon

Features a comfort icon indicating environmental conditions.

Backlight

Notes the presence and function of a backlight.

Setting Up Power Supply

Base Device Connection

Instructions for connecting the DC adapter to the base station and plugging into a power outlet.

Time Setting Procedures

Automatic Time Setting

Describes the automatic search for radio signals and steps if reception fails.

Manual Time Setting

Step-by-step guide for manually setting the time and date parameters.

Alarm Setting

Procedure for checking, setting, and activating alarms.

Snooze Function Operation

Instructions on how to activate the snooze function when an alarm sounds.

Temperature Unit Selection

How to switch between Celsius (°C) and Fahrenheit (°F) for temperature display.

Backlight Control

Details on adjusting backlight brightness with adapter and battery power.

Comfort Icons and Technical Data

Comfort Icons Explanation

Defines the 'DRY', 'COM', 'WET', and 'NO ICONS' indicators based on humidity and temperature.

Technical Specifications

Lists power supply, battery type, temperature/humidity ranges, and units.

Display Unit Placement Guidelines

Recommendations for optimal placement to ensure accurate readings and signal reception.

Technical Support Contact

Information on how to get assistance if the product does not operate properly.