USB•500 SERIES INSTALLATION
3
USB•500R (Receiver Unit)
1. Place the USB•500R unit close to the USB device to be served.
2. Connect the USB devices to the USB•500R unit.
3. Connect the power adapter to a suitable AC source wall outlet.
4. Connect the power adapter to the USB•500R unit using the supplied cable.
USB•500S (Sender Unit)
5. Place the USB•500S unit close to the host computer.
6. Connect the power adapter to the USB•500S unit using the supplied cable.
7. Connect the USB•500S unit to the USB•500R unit using the desired length of
fi ber optic cable outfi tted with standard MTRJ.
8. Connect the USB•500S unit to the host computer using the 6ft. USB cable
supplied with the unit. This connection should be made last.
To Next Page
Loading...
