Need help?Do you have a question about the Gefen EXT-UHDA-HBT2 and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | EXT-UHDA-HBT2 |
| HDMI Version | 2.0 |
| Maximum Pixel Clock | 600 MHz |
| Transmission Distance (1080p) | 100 m |
| Transmission Distance (4K) | 70 m |
| HDCP Compliance | 2.2 |
| HDR Support | Yes |
| RS-232 | Yes |
| IR | Yes |
| PoH (Power over HDBaseT) | Yes |
| Bandwidth | 18 Gbps |
| Power Supply | 5V DC |
| HDBaseT | Yes |
| Maximum Resolution | 4K @ 60Hz |
| Audio Support | Dolby TrueHD, DTS-HD Master Audio |
| Input Ports | HDMI |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20 to +70 °C |
| Humidity | 10% to 90% (non-condensing) |
Overview of the Gefen HDBaseT Extender's purpose and core functionality.
Step-by-step guide for physically connecting the extender system components.
Explanation of DIP switch settings for controlling extender features and modes.
Guide to using the Gefen Syner-G software for advanced functions and configuration.
Steps to confirm the USB driver installation for the Syner-G software.
Procedure to save EDID information from the device to a local file.
Procedure to load EDID files onto the HDBaseT extender via Syner-G.
Tools for monitoring HDBaseT link signal quality and performance.
Instructions for updating the product's firmware using the Syner-G software.
To Next Page