Gefen GTB-DVIKVM-ELR User Manual

DVIKVM
Extra Long Range
Extender
GTB-DVIKVM-ELR
User Manual
www.gefentoolbox.com
Gefen

Gefen GTB-DVIKVM-ELR Specifications

General

Brand	Gefen
Model	GTB-DVIKVM-ELR
Category	Extender
Language	English

Summary

Introduction

How It Works

Step-by-step guide on connecting the DVIKVM ELR Sender and Receiver units to sources and displays.

Operation Notes

Sender Unit Layout

Sender Unit Descriptions

Ethernet Input

5 V DC Locking Power Connector

DVI In

USB In

DIP Switches 1 - 2

References pages 9-11 for details on configuring the Sender Unit's DIP switches.

Receiver Unit Layout

Right Side

Left Side

Receiver Unit Descriptions

Remote Ethernet Port

DVI/RS-232 Link Connector

USB Link Connector

Connects USB signals from the Receiver Unit to the Sender Unit using a second CAT-5e/CAT-6 cable.

USB Output Connectors

RS-232 Port

DVI Out

5V DC Locking Power Connector

Connecting and Operating

How to Connect the DVIKVM Extra Long Range Extender

Step-by-step instructions for connecting the Sender and Receiver units and associated cables.

Wiring Diagram

Visual representation of the DVIKVM ELR extender's connections using Cat-5 cables.

DIP Switch Configuration

Sender Unit DIP Switches

Configuration of DIP switches 1 (Power Management) and 2 (RS-232 Mode) on the Sender Unit.

Receiver Unit DIP Switches

Configuration of DIP switches 1-4 for EDID, HPD, DVI, and RS-232 modes on the Receiver Unit.

Firmware Update

Network Cable Wiring Diagram

Specifications