Need help?Do you have a question about the Gefen GTB-UHD-HBT2 and is the answer not in the manual?
Provides an overview of the product's main components and initial setup.
Details the front panel and rear ports of the Sender unit.
Details the front panel and rear ports of the Receiver unit.
Step-by-step guide for connecting video, link, IR, RS-232, and power.
Illustrates the typical setup and connections for the extender system.
Explains the function and settings of DIP switches on the Sender unit.
Explains the function and settings of DIP switches on the Receiver unit.
Provides information on how IR carrier signals are handled and configured.
Describes the meaning of the Link, Video, and Power LED indicators.
Details how to control the source or display remotely using IR signals.
Explains the RS-232 connection pinout and usage for automation.
Guides users on how to check if the USB driver for Syner-G is correctly installed.
Instructions on how to download EDID data from the device to a local file.
Instructions on how to upload EDID data from a file to the device.
Steps for copying EDID data between different locations on the device.
How to view the EDID details using the Syner-G software.
Step-by-step guide to update the device firmware using the Syner-G software.
Lists the default DIP switch settings for both Sender and Receiver units.
Shows the TIA/EIA-568-B wiring for RJ-45 connectors.
Provides technical details like resolutions, connectors, operational parameters, and physical dimensions.
To Next Page
General