Machine Operation
Stopping Travel
WARNING
Park the machine on firm, level ground
and apply the parking brake. If you
must park on a slope or incline, park
across the slope and block the machine
securely to prevent movement.
If any controls are touched accidentally
when the safety bar is lowered, the
machine will move suddenly, and may
cause serious injury or death.
CAUTION
Never bring the machine to a sudden stop
except in the case of a true emergency.
Stop as gently as possible.
1. Slowly set the left control lever to the
neutral position. The machine stops.
Braking is automatically applied by the
hydrostatic drive system when the left
control lever is returned to the neutral
position. Full braking is achieved when
the safety bar is raised.
To Next Page
Loading...