Seat and Seat Belt
Seat Belt < CTL65 / CTL75 / CTL85 >
CAUTION
Always fasten the seat belt securely
before starting the engine.
Fastening the seat belt
1. Adjust the seat to the optimum position
for operating, raise your torso, and sit
back firmly into the seat.
2. Pull the seat belt to the desired length.
3. Make sure that the belt is not twisted and
then insert the tongue plate (A) into the
buckle (B) of the seat belt until you hear a
clicking sound as it locks in place.
Releasing the seat belt
To remove the seat belt, simply press the
button (C) located on the buckle.
The seat belt is automatically retracted.
To Next Page
Loading...