When Required
Lubricating the Levers
WARNING
Set the machine in the parking position,
stop the engine, remove the ignition key
and store it. Failure to do so may result in
the machine moving abruptly, leading to
serious injury or death.
If the levers or pedal no longer move
smoothly, apply grease.
Control levers
1. Remove the lower mount section of the
boot (1) and turn it upwards.
2. Wipe off the old grease.
3. Apply grease to points (A) and (B).
4. Re-install the boot (1).
Inspecting and Replenishing the
Windshield Washer Fluid
Use a windshield washer fluid intended
specifically for motor vehicles. Follow the
instructions included with the washer fluid.
Inspection
1. Open the cab door.
2. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishing
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer
fluid.
3. Reinstall the cap (2).
To Next Page
Loading...
Need help?
General
