Outlets
Move the louvers up and down or left and
right to adjust the air flow direction and
amount.
OPERATION
Heating and Dehumidifying
(in cold weather or when the
humidity is high)
After starting the engine, turn the air
conditioner ON and adjust the switches as
shown in the diagram above.
The outflow slot of the defroster can be
directed at the cab door.
Warm, dehumidified air blows on the cab
door, preventing fogging.
Set the temperature control dial and fan
switch to the desired positions.
Cooling
CAUTION
Excessive cooling can be harmful to
your health. It is best to keep the air
inside the cab only about 5 to 6°C (9 to
11°F) cooler than the outside air.
If the loader has been parked in the
sun, open the windows or door to let
the hot air out of the cab before using
the air conditioner.
After starting the engine, turn the air
conditioner ON and adjust the switches as
shown in the diagram above.
Set the temperature control dial and fan
switch to the desired positions.
Quick cooling
To cool the cab quickly, set the temperature
control dial to Cool and the fan switch to
High, as shown on the diagram above.
To Next Page
Loading...
