50960066/AP0813 42 PRINTED IN U.S.A.
SAHR Parking Brake Applying Procedure
1. Loosen the unlocking screws (1) and re-install the
stop washers (3).
2. Tighten the unlocking screws against the stop
washers.
Hydrostatic Transmission Locking
Procedure
1. Loosen the jam nut on a high pressure limiter.
2. Using an Allen wrench, turn the center release
screw back out until it stops.
3. Tighten the jam nut.
4. Repeat steps 1-3 for the other high pressure limiter.
WARNING
Before the Telescopic Handler can be returned
to service, the SAHR parking brake must be
returned to the applied position, and the
hydrostatic transmission high pressure lim-
iters must be locked.
THEFT DETERRENTS
Gehl has recorded all major component part numbers
and serial numbers. Users should take as many of the
following actions as possible to discourage theft, to aid
in the recovery in the event the machine is stolen, and
to reduce vandalism:
1. Remove keys from unattended machines.
2. Attach, secure, and lock all anti-vandalism and
anti-theft devices on the machine.
3. Lock doors of cabs when not in use.
4. Inspect the gates and fences of the equipment stor-
age yard. If possible, keep machines in well-light-
ed areas. Ask the local law enforcement agency to
make frequent checks around the storage and work
sites, especially at night, during weekends, and on
holidays.
5. Report any theft to your dealer and insurance com-
pany. Provide the model and all serial numbers.
Request your dealer to forward this information to
Gehl Company.
To Next Page
Loading...
Need help?
General
