ENGLISH
39
HOW TO CHECK/ ADJUST THE HEIGHT OF THE BRINE VALVE
(Reserved to Technical Assistance Service
Brine Valves are placed to a certain height according to the model of
water softener.
To check the proper adjustment of the valve, take out the brine valves
with the floats from the traps and measure the height with a rule by
checking it corresponds to the height shown in the table.
Container Grid Feet Float
Model capacity Grid height height height
(litres) (cm) (cm) cm (+/– 0,5)
Decal 15 Basic 100 Yes 10 – 19
Decal 20 Basic 100 Yes 10 – 19
Decal 25 Basic 100 Yes 13 – 19
Decalux 5 Basic – – – – 12
Decalux 10 Basic – – – – 17
Decalux 15 Basic – – – – 26
Decalux 20 Basic – – – – 36
Decalux 25 Basic – – – – 47
To Next Page
Loading...
