STORE THE EDIT IN A DIFFERENT PERFORMANCE LOCATION
Once your PERFORMANCE edit it's complete press the
blinking PERF button on the display.
At this point both the PERF button and the digit
"P01" in the display (indicating the number of the
edited performance in this example), blink at the
same time.
Keep the PERF button pressed at least for 2 seconds
to store in the current location. The display show the
message "STR" (STORE).
1
2
3
Once your PERFORMANCE edit it's complete press the
blinking PERF button on the display.
1
At this point both the PERF button and the digit "P01"
in the display (indicating the number of the edited
performance, N.01 in this example), blink at the
same time.
2
It's now possible to select another PERF location using
the DATA
buttons. It's possible to select any of
the 99 available memory locations.
3
Once the desidered memory location is reached, keep
the PERF button pressed at least for 2 seconds to store
data. The display show the message "STR" (STORE).
4
The PERF LED and the display will stop blinking, the
PERF number is showed again to comfi rm the STORE
operation.
4
The PERF LED and the display will stop blinking and the PERF
number is showed again to comfi rm the STORE operation.
To Next Page
Loading...
General