Need help?Do you have a question about the Gemini CD-9500 and is the answer not in the manual?
General| Digital Output | Yes |
|---|---|
| Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >90dB |
| Dynamic Range | >90dB |
| Total Harmonic Distortion | <0.05% |
| Output Voltage | 2V |
Provides an overview of the Gemini CD-9500 PRO II Dual CD Player and its warranty.
Lists important warnings for safe operation and handling, including temperature and environment.
Details laser diode properties and compliance with safety standards.
Instructions on how to set the player for 115V or 230V operation using a rear panel switch.
Guidance on connecting the CD player to a mixer or receiver using remote and line output jacks.
Details the power switch, disc tray, and open/close button functions for CD loading and playback.
Explains the display, play/pause, track skip, search buttons, and search dial for controlling playback.
Describes the time display, cue, cue/B repeat, and pitch control functions for precise playback.
Information on connecting digital audio devices to the BNC output connector for digital signal recording.
Step-by-step guide on powering on, loading a CD, and starting playback.
Detailed guide on memorizing and fine-tuning cue points for precise track starting.
Solutions for common issues like discs not playing, no sound, or skipping.
Details general type, disc compatibility, time display, pitch, and instant start features.
Provides technical audio data including quantization, frequency response, and output levels.
Lists power supply requirements, physical dimensions, and weight for player and control units.
To Next Page
